FRCNW Enlisted Aviation Warfare Specialist (EAWS) Board Practice Test

These questions are part of the practice quiz. Start practicing

• What does Section Four of the OPNAV 4790/51 specifically deal with?
• In the context of BA C2 impact, what does the term "customer demand" refer to?
• What is a key feature of Type 1 hangars?
• What does the vertical axis of an aircraft refer to?
• What is the function of Mode 2 in the IFF system?
• How many classes of mishaps are there in aviation safety?
• Which method is improper for removing paint from composite surfaces?
• Which of the following is NOT a danger area in aviation?
• Which of the following methods is considered a last option for controlling bleeding?
• Which Job Status indicates that an item is awaiting depot level repair?
• What do the letters FPCON stand for?
• What is the meaning of "Caution" in operational guidelines?
• How should non-RFI tire/wheel assemblies be shipped?
• What type of aircraft does FRCNW support?
• The responsibilities of Material Control include ensuring that materials ordered correspond to what?
• What is a key feature of visual identification for COMNAVAIRLANT?
• Which of the following describes a type of calibration sticker?
• How many chains are required for an initial tie down?
• What are the two types of metal classes?
• Which FRC is located in Cherry Point, NC?
• Which of the following is a type of corrosion?
• What does BCM-4 signify?
• What type of shop is responsible for the maintenance of generators?
• Which methodology is focused on analytics and data-driven decisions to reduce defects?
• Which methods are utilized for applying heat during composite repair?
• What type of current only flows in one direction?
• During the inspection of ferromagnetic materials, what indicates a defect?
• What does the fire tetrahedron represent?
• What does a Four Line Release Lanyard permit during a parachute descent?
• What does the OPNAV 4790/108 represent?
• Which force opposes gravity during an aircraft's flight?
• What was the first aircraft carrier?
• Which of the following is one program managed by QA?
• In which year was NATOPS established?
• Where can you find specific information about the HAZMAT you are using?
• How many sections does an OPNAV 4790/51 record contain?
• What is the single most frequently occurring tire problem in the Navy?
• Which of the following personnel is identified by yellow jerseys?
• What is a characteristic of 1st degree burns?
• What is the primary function of the parachute loft?
• In aviation, how is static electricity typically discharged?
• What maintenance is referred to as having a focus on reliability?
• Which of the following shops is primarily involved in structural repairs?
• What is the potential consequence of incorrect tire assembly installation?
• What is one of the danger areas in aviation?
• What is the purpose of the 802 format?
• What does Job Status M6 indicate in terms of workload?
• Which parachute canopy size is noted for its 20 gore construction and water deflation pockets?
• What does Six Sigma primarily focus on?
• Which job status corresponds to an item that is currently being worked on?
• What is a potential consequence of a Class B mishap?
• What data does the Equipment History Record (EHR) specifically exclude?
• Who is designated as the Maintenance Material Control Officer for FRCNW?
• Who can provide training for new types or models of SE?
• What describes the longitudinal axis of an aircraft?
• Which of the following aircraft is a transient client supported by FRCNW?
• Who was the first MCPON?
• What is speed?
• What is NOT a type of chemical agent?
• What does CPI stand for in a maintenance context?
• What is the threshold for a Class B mishap?
• What are the 3 types of SE tire and wheel assemblies?
• What is the purpose of the Scheduled Removal Component Card (SRC)?
• What are the four principles of Operational Risk Management (ORM)?
• What does the acronym WRA stand for?
• Who serves as the Executive Officer for FRCNW?
• Which of the following would NOT be included in a Rapid Improvement Event?
• Which of the following best describes the operation of FMIR technology?
• Which of the following are considered the basic components of an aircraft hydraulic system?
• Which equipment is associated with the Armament Weapons Support Equipment?
• In maintenance terminology, what is a DM?
• What is the primary responsibility of the IMA regarding aircraft tire and wheel assembly?
• What is the full form of SORTS?
• What should be used to clean hydraulic systems before inspection?
• What does PMCS refer to in aircraft maintenance?
• How is PKP identified on the flight deck?
• What are the different types of hydraulic decontamination?
• Which of the following tools is used for continuity checks in circuitry?
• What are the two actuation devices for the Emergency Oxygen System?
• What does the SE ELECTRICAL REPAIR BRANCH primarily focus on?
• What is COMSEC associated with in military operations?
• What is the basic purpose of the ALSS rotatable pool?
• Which of the following defines hazardous waste (HAZWASTE)?
• Which rate works in the 900 Division?
• What is the temperature and expansion rate of Liquid Oxygen (LOX)?
• Which abbreviation refers to Helicopter Maritime Strike?
• Which agent is capable of causing general destruction of tissue and inflammation?
• What does the acronym RADAR stand for?
• What is the primary focus of I-Level maintenance?
• What does NALCOMIS stand for?
• Which class of mishap is associated with a fatality?
• What does the DEFCON scale indicate?
• What does the 350 format describe?
• Which personal protective equipment (PPE) is specifically required on the flight deck?
• What are the requirements needed prior to being issued a SE Operator's License?
• What basic personal protective equipment (PPE) should a technician wear when handling batteries?
• Which of the following is a goal of the QA program?
• What was the first jet-powered naval aircraft?
• Which is the largest hangar type found on board ships?
• What is the service life of an oxygen converter assembly?
• What is the preferred method for bucking solid rivets?
• How many subsystems does AAS encompass?
• Which individual represents the Department of the Navy?
• Which type of maintenance involves significant repairs and upgrades?
• What does a HAZREP report aim to address?
• Which type of HAZMAT is characterized by its ability to catch fire easily?
• What does LASER stand for?
• What is the main component of PKP?
• What should be the first step in an Emergency electric shock scenario?
• How many aircraft can an aircraft carrier hangar typically hold?
• What is a characteristic of Class D fires?
• Which of these impacts signifies no capability to provide calibration/service?
• What does LED stand for?
• Which type of helicopter is primarily used for combat missions against marine targets?
• What wind speed is classified as heavy weather?
• What does BCM-9 indicate in the job status context?
• How many DEFCON levels exist?
• What type of training is specific for acquiring SE operator's license?
• What are the responsibilities of an O-Level maintenance activity?
• What aspect of process improvement does the acronym "TRR" focus on?
• What is a sign that thermal runaway is occurring?
• What are the two main types of maintenance described in the NAMP?
• How many types of chemical agents are recognized in military contexts?
• What type of ordnance management does the NOMP address?
• What is the recommended action for a massive hemorrhage?
• How should tires and tubes be stored?
• Which of the following is a base metal group a welder can be certified in?
• What is Newton's First Law?
• What kind of equipment might be serviced by the Auxiliary Power Units Support Equipment shop?
• What does BA C1 Impact indicate?
• What is the estimated financial impact of a false activation of the AFFF system?
• What does HSC stand for in relation to helicopter operations?
• How is corrosion defined?
• What is the proper first aid protocol for managing a mass hemorrhage?
• Which of the following is a type of basic wound?
• The shop labeled 51E is known as what?
• What does the DEFCON scale measure?
• What is the most dangerous SE tire and wheel assembly?
• In which direction does current typically flow?
• What date was the Jupiter re-commissioned as the USS Langley?
• What type of use does Mode 3/A of IFF allow for?
• What does NDI stand for within the context of aviation maintenance?
• Which FPCON level is most appropriate when terrorist activity is suspected but has not yet occurred?
• What does Newton's Third Law state?
• What type of equipment does the Parachute Shop focus on?
• What is motion?
• Which of the following defines a Class C fire?
• Which of the following is considered a type of special maintenance activity?
• What type of aircraft are Type 2 hangars used for?
• What rate works in the 500 Division?
• What does the acronym SERMIS represent?
• What are the three types of motion?
• What does CASS stand for in an aviation maintenance context?
• Which location is referred to as FRC WEST PAC?
• Which of the following is one type of battery category used in Naval Aviation?
• What is a key feature of a MA-1 series overrun barrier?
• What is one of the duties of Maintenance Administration?
• Which of the following best describes the function of a hydraulic pump in an aircraft system?
• Module Service Records (MSR) are used to record what type of data?
• Which of the following is true concerning Class A fires?
• How is Mine Warfare defined?
• In aviation, what role does 'sea control' play?
• What type of personal protective equipment (PPE) is required for working with lasers?
• What is the purpose of a meter card?
• Why is it essential to understand corrosion in materials?
• Which shop corresponds with the number 51F?
• What is the definition of service life?
• What level of maintenance involves disassembly of the compressor rotor?
• How does FLIR technology primarily operate?
• What is the main purpose of Electronic Counter Measures?
• Which of the following ratings of Sailors is assigned to work center 74C?
• What is the primary purpose of the I-level Power Plants Division?
• Which inspection technique involves the use of a liquid during the assessment of parts?
• What is one type of mine countermeasure?
• How many levels are there in the FPCON system?
• When is a Broad Arrow normally used?
• What is the main goal of the Theory of Constraints?
• What is oily waste primarily composed of?
• Which rate typically works in the 700 Division?
• What does Alternating Current (AC) refer to?
• Which type of battery is commonly used for its rechargeable properties in Naval Aviation?
• Which team is responsible for handling accidents on the flight deck?
• How often are turnaround maintenance checks typically performed?
• How is waste oil defined in terms of its characteristics?
• Which of the following is NOT an item listed as part of the Survival Kit?
• Which type of hangar supports Marine Corps aircraft?
• What is the maximum preservation time frame for Level 1 preservation?
• What is the SI unit for force?
• What survival item is NOT mentioned as optional in the life raft kits?
• What is one of the goals of periodic maintenance?
• For how long should an old (completed) OPNAV 4790/52 be retained?
• What is the primary objective of the Naval Aviation Maintenance Program (NAMP)?
• Which shop would be involved in maintaining armament weapons?
• Which of the following SSIC codes falls under the category of Military Personnel?
• What does the acronym CASS stand for?
• The ability of fire to spread is primarily due to which key element?
• What situation warrants the implementation of FPCON Delta?
• Which shop is primarily focused on auxiliary power units?
• In what capacity does the CMC assist the CO?
• What region does the 4th Fleet's AOR encompass?
• What project code is used for BA's?
• Which of the following is one of the basic components of a Radar system?
• Which system is commonly associated with aerial combat targeting?
• What is the basic process of welding?
• What is the focus area of the Power Plants Module Repair Shop?
• What is the preservation time frame for Level III?
• Who is designated to wear a yellow jersey on the flight deck?
• What does the term "advance" in Advance Targeting Forward Looking Infrared suggest?
• What is BCM-5 classified as?
• The lateral axis of an aircraft runs parallel to what?
• How often should tire pressure on operating aircraft be checked?
• Which shop is responsible for screening materials?
• What does NOMP stand for?
• What is the role of the Command Master Chief?
• What color stripe identifies a fire fighting station on the flight deck?
• Which position is focused on ensuring all crew members have available programs and opportunities?
• What defines a ready-shelter in the context of protection?
• What is indicated by DEFCON 4?
• Which position is responsible for the overall maintenance in FRCNW?
• When an aircraft is pulling up, what forces are primarily acting upon it?
• What must be included in the AC/TX inspection?
• What does the capacitance-type probe assembly do in the oxygen converter assembly?
• What does SDS stand for?
• What does MOPP stand for?
• What is the primary goal of OOMA in aviation maintenance?
• What condition is characterized by DEFCON 3?
• What does the term "Should" convey in directives?
• Which concept explains why a passenger in a car lurches forward when the car suddenly stops?
• How many different modes of IFF are there?
• Thrust is defined as what?
• How many degrees of burns are there?
• What does CACO stand for?
• In an aircraft system, what role do actuating units play?
• What is an effective way to minimize corrosion damage?
• Type 3 hangars are intended for which category of aircraft?
• What is the approximate time it takes to close the aircraft carrier hangar doors?
• Which fleet is responsible for operations in the Middle East?
• How many types of mine countermeasures are there?
• What does OPREP stand for?
• How many types of hangars are utilized in naval aviation?
• What is the role of the Power Plants Can-uncan Shop?
• How many different types of bone fractures are typically recognized?
• What is a common characteristic of toxic HAZMAT?
• What is one of the most common causes of kinks in a cable?
• What type of personal protective equipment (PPE) is required on the flight line?
• What does RCM stand for in relation to rework maintenance?
• What is the purpose of the parachute loft packing area?
• Which type of motion involves movement along a straight path?
• How many BCM codes are there?
• What does BCM stand for?
• How many personnel are typically required to move an aircraft?
• What is a potential hazard when working with carbon/epoxy composite materials?
• What is the definition of lift in aviation?
• What happens to pressure when fluid speed increases according to Bernoulli's principle?
• Which of the following PPE is typically used to protect the face when handling HAZMAT?
• What is BCM-1?
• What does the NATOPS evaluation process include?
• What is the induction time limit for Non-RFI engines?
• Which of the following is a general example of Personal Protective Equipment (PPE) used with HAZMAT?
• How many chest compressions should be administered during CPR?
• What is the purpose of grounding an aircraft?
• Which personal protective equipment (PPE) is required when working with composite materials?
• What technique is suggested for paint removal on small metal areas?
• Which of the following represents a 'gouge' in blade maintenance?
• What is the significance of regularly checking tire pressures in aviation?
• How many personnel does the Single Hoist Ordnance Loading System require?
• What does AOA stand for in aviation terminology?
• What does the NAVAIR 00-35-QH-2 ALSS allowance list authorize?
• Which form is utilized for verifying the current status of SE maintenance actions?
• Type 1 hangars are specifically designed for which type of aircraft?
• What is the maximum PSI allowed when shipping RFI tire/wheel assemblies off station?
• What is one method to control bleeding?
• What is the main responsibility of the Executive Officer (XO)?
• What does QAR stand for?
• What does NAT stand for in inventory management?
• What is the basic purpose of Non-Destructive Inspection (NDI)?
• What is the primary concern during tire assembly maintenance?
• Which feature is crucial for ensuring safety during operations involving HERO?
• Why is the Vibration Analysis program significant in aviation?
• What defines a Class C mishap?
• What is celebrated as the birth date of Naval Aviation?
• What is the MIL-SPEC for hydraulic fluid in Naval Aircraft?
• Job Status M1 is used to signify what?
• What is NOT a component of the NATOPS evaluation?
• What is the function of a radar Transmitter?
• What is one of the purposes of using chains for tie downs?
• What is the manual number for aeronautical equipment welding?
• What type of oxygen is provided by the Liquid Oxygen System?
• What does BCM-8 refer to?
• Which of the following is used in a medical context to treat nerve agent exposure?
• What does the Equipment History Record (EHR) document?
• What is the primary effect of a blister agent?
• Which branch is involved in the repair of gas engines?
• After how many cycles of CPR should the patient be reassessed?
• What is an effective way to enhance ventilation in a workspace according to energy-saving practices?
• What is the code of one Technical Directive that pertains to Support Equipment?
• What is the main objective of an engine FOD investigation?
• What was the primary purpose of establishing NATOPS?
• What type of document is an OPNAV 4790/64?
• What is the purpose of a BA addendum?
• What is the goal of first aid in emergency situations?
• Which maintenance area is focused on non-flying engine components?
• Which foam is more effective in dealing with hydrocarbon fires?
• What does the acronym BTU stand for?
• What is essential to extinguishing a fire based on the fire tetrahedron?
• What type of job status is M4 typically used for?
• What is the only approved method for removing paint from composite laminate/structure?
• Which classes of fire are classified as Class A fires?
• What is the primary concern of Quality Assurance in maintenance operations?
• What is a JCN?
• Which element describes the parachute loft's work area?
• What is the purpose of the OPNAV 4790/64?
• How often must a 2M technician re-certify?
• What is the purpose of the pressure closing valve in a converter assembly?
• What is the main goal of O-Level maintenance?
• What is a common outcome of using the X-Ray NDI method?
• What is the significance of identifying corrosion early?
• What does the acronym FLIR stand for?
• What does the term 'growth' in blade maintenance refer to?
• What is the preservation time frame for Level II?
• What is the geographical AOR for the 5th Fleet?
• What material are the suspension lines of the 28-foot canopy typically made from?
• What does WUC stand for in aviation maintenance?
• What is an OPNAV 4790/51?
• What might trigger a BA addendum submission?
• What is a key responsibility of the 400 Division?
• What does Job Status WS denote?
• What is the primary objective of I-level corrosion control and cleaning?
• How many Broad Arrow Impact Ratings are there?
• What is the purpose of using gloves when handling HAZMAT?
• What does second-degree engine repair involve?
• How is the 20MM M61A1 Gun System driven?
• What is the oldest US Navy commissioned vessel?
• What distinguishes Miniature Electronic Repair from Micro-Miniature Electronic Repair?
• Which other safety equipment must be present in a work center that handles batteries?
• What is the function of the Command Career Counselor (CCC)?
• What is a key responsibility of Material Control?
• What does Newton's Second Law state about acceleration?
• What is the geographical Area of Responsibility (AOR) for the 7th Fleet?
• What is the primary indicator for FPCON Charlie?
• Metal hardness is measured by which scale?
• Which FPCON level is activated during an increased or more predictable threat of terrorist activity?
• What is acceleration?
• Which of the following is NOT a series of the SSIC codes?
• What is the purpose of a Deflated tire Flag?
• What is the first step in the ORM process?
• What is the primary objective of hydraulic tube bleeding?
• Which of the following shops is related to the number 51C?
• What is radiological warfare?
• What is the maximum towing speed allowed for aircraft?
• Which IFF mode is designated for military use only?
• What is the primary function of flaps on an aircraft?
• Which process improvement method emphasizes flow and efficiency by eliminating waste?
• Where is a deep-shelter typically located?
• What is a primary advantage of using Electronic Counter Measures?
• Where is the oxygen converter assembly typically located?
• What is one of the responsibilities of the command laser safety officer (LSO)?
• What is the most common type of corrosion associated with Ground Support Equipment (GSE)?
• Which personnel wear green jerseys on the flight deck?
• What type of special electrical systems are needed in shore-based hangars?
• How many types of nuclear explosions are commonly recognized?
• What is a major hazard associated with oxygen handling?
• What is performed during an Acceptance inspection?
• Which of the following does VFA stand for?
• Which of the following is NOT one of the objectives of first aid?
• What is included in third-degree engine repair?
• Which types of upkeep maintenance are recognized?
• What does FCF stand for in aviation maintenance?
• What is the primary focus of Lean methodology?
• Mishandling of tire and wheel assemblies can lead to what?
• What is the primary purpose of a CASS bench?
• Which shop is tasked with maintenance relating to propellers?
• What does the acronym AT FLIR represent?
• Which of the following is responsible for comprehensive maintenance of aircraft engines?
• Which of the following is NOT a class of fire?
• Which of the following methods is preferred for paint removal on large metal areas?
• What is Atropine/2-PAM-Chloride used for?
• What is inertia?
• What type of information does a maintenance management system like NALCOMIS provide?
• Which of the following is NOT a category of HAZMAT?
• Who established the AMMRL Program?
• What safety device is commonly worn to prevent ESD?
• Which area is referred to as the COMM/NAV Branch?
• Who holds the position of Chief of Naval Operations (CNO)?
• What is one of the key responsibilities of a Logbook Clerk?
• When was the Sailors Creed developed?
• Who is the Maintenance Master Chief of FRCNW?
• Which subsystem of AAS focuses on weapon systems?
• In calibration processes, what does TMDE stand for?
• What is the design capacity of the LRU-33 life raft?
• What rate works in the 800 division?
• What does DEFCON 5 signify?
• What does BA C3 impact signify?
• Who is responsible for the Command Ordnance Qualification Certification Program?
• Which statement describes the I-level maintenance concept?
• Which aviation shop would you consult for parachute rigging and safety checks?
• Which of the following is a geographic command?
• Which component is a primary feature of the M61A1 firearm system?
• Which of the following describes the Quality Assurance Representative's role?
• What is the purpose of heat lamps in composite repair?
• What does TPI stand for in security protocols?
• What is an essential condition for a LOX converter to require purging?
• What is the basis of the Rockwell hardness test?
• What type of equipment is primarily serviced in the Oxygen Regulator and Equipment Shop?
• What must be performed regularly to ensure aircraft tire safety?
• What does HERO stand for?
• What is the significance of the NDI eddy current inspection?
• What is one of the four major causes of avionics corrosion?
• What is the basic purpose of Liquid Oxygen Converter Assemblies?
• What is the geographical Area of Responsibility (AOR) for the 6th Fleet?
• What is the primary focus of the shop labeled 51B?
• Which naval aviator was the first American to go to space?
• What is a potential safety hazard you might encounter while working with AAS?
• What does the acronym TACAN stand for?
• How does the Magnetic Particle NDI method function?
• Who is responsible for overseeing the overall operations of the Navy?
• Which personnel wear a white jersey on the flight deck?
• How does Elapsed Maintenance Time (EMT) differ from Man-Hours?
• What does the acronym AMSU stand for in relation to material screening?
• What kind of personnel are typically involved in the operation of the SHOLS?
• How frequently should a fresh water wash down be performed on test facilities?
• What is the primary purpose of a Naval Message?
• What is the goal of the Hearing Conservation Program?
• Which method is used to remove paint from large metal areas?
• Name one of the two firing rates available on the M61A1.
• How many pilot-selectable firing rates are there on the M61A1?
• What kind of equipment does the SE MOBILE MAINTENANCE FACILITY SUPPORT BRANCH support?
• What is the implication of Job Status M8?
• What is the primary responsibility of the Commanding Officer (CO)?
• What is the primary function of FRC AVIATION SUPPORT EQUIPMENT?
• What is indicated by BCM-7?
• What does the acronym OBOGS stand for?
• Which of the following is an example of a pathogen?
• What do Standard Subject Identification Codes (SSIC) primarily indicate?
• How many classes are metals divided into?
• Which shop is associated with the number 51A?
• In the context of battery safety, what does "neutralizing" refer to?
• What is the composition of a 7x7 cable?
• What is one characteristic of an effective energy-saving policy?
• What type of repair does Micro-Miniature Electronic Repair involve?
• What follows after making risk decisions in the ORM process?
• What does BCM-6 represent?
• What does the AFFF in AFFF system stand for?
• What is a basic function of a digital multimeter?
• What is the visual identification structure for COMNAVAIRPAC?
• What does the strength-to-weight ratio represent?
• Which of the following is a peculiar item required for shore-based hangars?
• What does SE stand for in the context of aviation?
• During maintenance on oxygen converter assemblies, what should be done if the system is open to the atmosphere?
• Who holds overall responsibility for the NAMP?
• What is the compression-to-breath ratio during CPR?
• Which type of directive provides information but does not require immediate action?
• Which of the following is a mode of IFF?
• What is the primary purpose of the Maintenance Due Report?
• Which item is included in the survival items installed in the SKU-10/A?
• What is typically used to combat Class C fires?
• Which core capability emphasizes humanitarian efforts in crisis situations?
• Which job status indicates that an item is not able to be serviced by the current facility?
• How many different blocks of CASS benches are there?
• Which of the following is NOT a tire issue commonly faced in aviation?
• Which of the following is a method used for contamination analysis?
• Which factor contributes to aviation mishaps?
• What axis do rudders control?
• What component repair shop is responsible for jet engine repairs?
• What are the five steps of CPR?
• What does the acronym CO represent in a naval setting?
• What does the acronym ESD stand for?
• Which branch would provide support for mobile maintenance facilities?
• What is OOMA in the context of naval aviation?
• Which of the following is NOT a general type of parachute loft in use?
• What does the Executive Officer focus on?
• Which of the following is NOT a type of corrosion?
• What is the main responsibility of the aircraft armament division?
• What kind of aircraft is primarily associated with FRC NORTH WEST?
• What does AAS stand for?
• Which branch handles radar and electronic countermeasure systems?
• Who is the Command Master Chief of FRCNW?
• Which component is part of a converter assembly in a Liquid Oxygen System?
• Which term best describes the proactive use of mine countermeasures?
• In which shop would tire and wheel maintenance be conducted?
• What does AMSU stand for?
• Which function is NOT included in the responsibilities of a Logbook Clerk?
• What significant battle happened between the 7th to the 8th of May 1942?
• What does the number 520 represent in the context of shops?
• What is a key element of FRC maintenance responsibilities?
• What is the basic purpose of the test cell for gas turbine engines?
• What describes the nature of freezing as a safety hazard for oxygen converters?
• Which of the following branches deals with periodic maintenance tasks?
• What does AUL stand for in the context of HAZMAT?
• Which of the following is not a focus area of the Electric Shop?
• Which shop focuses on safety equipment for aviators?
• Which personal protective equipment is utilized for oxygen converters?
• Which technique is used to measure the hardness of metals?
• What type of safety hazard is associated with AAS operations?
• What are the three primary Airspeed Continuous Process Improvement methods?
• How many I Level programs does QA manage?
• What is the classification for BCM-3?
• What is an OPNAV 4790/102?
• Which section of the OPNAV 4790/51 record details the Custody and Transfer?
• When is a transfer inspection performed?
• Which DEFCON level indicates a heightened state of readiness just below maximum?
• What is the geographical AOR for the 3rd Fleet?
• How many ratings are assigned to work center 74C?
• In which location is FRC SOUTH WEST situated?
• Which section of an OPNAV 4790/51 includes Technical Directives?
• Which inspection includes a preoperational inspection and functional testing?
• What is Newton's Second Law?
• What does Job Status M9 signify?
• What does 1st degree engine repair involve?
• What is the significance of 14NOV2910?
• What does BCM-2 indicate?
• What does the acronym CRIPL stand for?
• What does PPE stand for?
• What does TS refer to in a maintenance context?
• Which step comes last in the ORM process?
• What does the acronym SRA stand for?
• What is the function of the Aeronautical Material Screening Unit (AMSU)?
• In the hierarchy of FRCNW, who assists the Commanding Officer directly?
• What is a common misconception about turning off lights in a workspace?
• Who is identified by wearing brown jerseys on the flight deck?
• What is used to describe the welding process of joining metals?
• What is the aim of employing chemical agents in warfare?
• How are RFI tire/wheel assemblies shipped?
• Who is responsible for reporting SE misuse/abuse?
• What is the meaning of TRR in supply chain management?
• Which division is responsible for maintaining the Central Technical Publications Library?
• What does the Threatcon scale determine?
• The designation "530" stands for which branch?
• Where must a tire be placed during inflation of a tire/wheel assembly?
• What is a common application for using heat during composite repair?
• What modifications are made to the 26-foot parachute canopy?
• Which of the following is one of the five subsystems of AAS?
• What is the primary function of the AN/URT-140 Radio Beacon Set?
• Which material can the indenter used in the Rockwell hardness test be made from?
• What is the proper storage technique for a tire and wheel assembly?
• In what type of aircraft is the LPU-32/P life preserver assembly authorized for use?
• Galvanic corrosion occurs due to:
• Which three levels of maintenance are identified in the NAMP?
• For SE operator's license renewal, do you have to redo Phase I training?
• What base metal group includes stainless steels?
• What does chemical/biological IPE stand for?
• Which division is responsible for I-level maintenance?
• In which month did the CNO sign the Navy Energy Vision?
• How are AFFF stations identified on the flight deck?
• Which category of Technical Directives focuses on routine operational needs?
• What division is responsible for armament maintenance and support?
• Which of the following materials is vital in the LOX environment to prevent hazards?
• What should be considered when determining the Broad Arrow Impact Rating?
• What element is crucial in preventing heat transmittal in the converter assembly?
• Why is it important to have strong initiatives for reducing energy consumption?
• What action should you take if unable to secure power in an emergency electric shock scenario?
• What color jersey do elevator operators and tractor drivers wear on the flight deck?
• What is the primary function of the Model 7000 Automatic Parachute Ripcord Release (APRR)?
• Class B fires are typically caused by what?
• What is the primary method for detecting a lost pilot using the URT-140 Radio Beacon Set?
• How is the emergency stop signal indicated on the flight deck?
• Which section is responsible for replenishing the PEB as required?
• Who is the Maintenance Officer for FRCNW?
• What does the 700 Division primarily focus on?
• How many base metal groups can a welder be certified in?
• What does Job Status M2 mean in aviation maintenance?
• What type of fire is classified as Class B?
• What is a common cause for a fuse or circuit breaker to trip?
• Which of the following is a location of an FRC?
• When should a BA SEIS Report be submitted?
• Which item is NOT included in the survival kit of the MPLR and LRU life rafts?
• What PPE should be worn on the hands when working with composite materials?
• What is the implication of BA C2 impact?
• What does the acronym DECKPLATE stand for?
• What is one benefit of using natural light in a work environment?
• What does VAW represent in naval aviation?
• Which term describes the smooth repair of a ragged edge on a blade?
• What does PMI refer to in terms of rework?
• In the context of the provided text, which statement is true about Special Calibration?
• What is the primary function of the Enlisted Safety Council?
• What does the term 'airspeed' refer to?
• What is an essential use of calibration in the field of aviation?
• A Class D fire involves which type of material?
• Which directive category indicates time-sensitive actions required to prevent mishaps?
• Which additional related items might be accommodated in the parachute loft?
• Which of the following is NOT one of the core capabilities?
• Taxiways are primarily used for what purpose?
• What does BA C4 impact entail?
• What does the acronym SMART stand for in a military context?
• What is the basic treatment for a suicide gesture or attempt?
• What is represented by the abbreviation TD in aviation operations?
• What type of technical directive communicates urgent repair needs affecting safety?
• Which maintenance level is not part of the three identified in the NAMP?
• What should trigger purging procedures for a LOX converter?
• What is an OPNAV 4790/52?
• What is the primary function of Early Warning in naval operations?
• How many main objectives are there for first aid?
• What does FPCON Level Alpha indicate?
• How many basic radar components are there?
• Which parachute canopy has a flat modified design and a diameter of 28 feet?
• What does the acronym VIDS stand for?
• What does the acronym SHOLS stand for?
• What does RIE stand for in the context of improvement events?
• Why are composite materials favored over traditional metals in aircraft components?
• What is a characteristic of 2nd degree burns?
• What is the purpose of DD Form 200?
• What are the three basic requirements for a simple circuit?
• How often are HAZMAT stowage locations inspected?
• What is the name of the shop that handles repair needs for afterburners?
• What is the primary purpose of the OPNAV 4790/52?
• Which of the following activities is typically part of second-degree engine repair?
• How many chains are recommended for heavy weather conditions?
• Up to how many knots is considered normal weather?
• Which shop specializes in electrical repairs and maintenance?
• What does Bernoulli's Principle explain?
• What is one common method to avoid electrical shock when assisting an electrocution victim?
• How many chains are required for normal weather?
• What type of systems does the AIR CONDITIONING REPAIR BRANCH manage?
• What does the acronym CPR stand for?
• How are CO2 bottles identified on the flight deck?
• Before disassembling a tire/wheel assembly, what must be verified?
• What does the acronym AMMRL stand for?
• Which branch is primarily focused on troubleshooting issues during flight deck operations?
• What is the purpose of the Navair 17-1-125?
• What should you do if someone has a sucking chest wound?
• What is the main role of the FLIGHT DECK TROUBLESHOOTER BRANCH?
• What does the acronym MPLR stand for in the context of life rafts?
• What are blueprints?
• What is the reporting timeframe for an engine FOD incident once discovered?
• Which shop specializes in the maintenance of auxiliary power units and gas turbine engines?
• What is the main purpose of a Broad Arrow (BA)?
• Which blade maintenance term describes a partial fracture?
• How many HERO Conditions are there?
• Which rate typically works in the 400 Division?
• What type of hazard might one encounter while dealing with munitions in AAS?
• When was the Battle of Midway fought?
• What month is recognized as National Energy Action Month?
• What is the only mandatory hand signal for directing aircraft, regardless of type?
• What is the relationship defined by Ohm's Law?
• What does a BA denote regarding aeronautical components?
• What does ORM stand for in a military context?
• How many Technical Directives pertain to Support Equipment?
• What does 'engine FOD' stand for?
• What is a typical characteristic of a bent blade described as 'bow'?
• In military terminology, what does "Shall" represent?
• Which mode of IFF is noted for being encrypted?
• Which of the following is NOT a type of shop mentioned?
• What is the basic purpose of the Airspeed program?
• What kind of tool is used to compare the electrical signature of components on a circuit board?
• How many battery categories are utilized in Naval Aviation?
• What is a Class A fire categorized as?
• What is the purpose of the material screening shop?
• What is the main factor determining the classification of a fire?
• Which is a characteristic of a circuit breaker?
• What is the main function of the Hydraulics/Pneumatics Branch?
• How does radar technology work?
• What is the recommended method for removing paint from composite surfaces?
• Why are bucking bars considered the preferred method for rivet installation?
• Which feature of PPE is crucial when handling leaking batteries?
• What should be understood about the term "Note" in documentation?
• What is a key concept of Modular Engines?
• What is the purpose of an I-Level maintenance activity?
• Which of the following is NOT a benefit of using composite materials in aviation?
• What does Job Status M3 signify?
• Which branch would typically perform inspections of periodic maintenance?
• Which branch focuses on the repair of components and assemblies?
• What flight control surface controls the longitudinal axis?
• What does DEFCON 2 indicate?
• How is the 20MM M61A1 Gun System Controlled?
• Which type of repair does the Composites Repair Shop deal with?
• What defines shelf life?
• How many classes of LASER are there?
• What was the date of the first fatality in naval aviation?
• What is the purpose of the SKU-10/A lid assembly?
• How should engine FOD incidents be reported?
• What are the two most important factors in preventing corrosion?
• Which branch is responsible for repairs related to structural and hydraulic systems?
• Inflated and partially inflated tire and wheel assemblies are treated with the same respect and care as what?
• Who is the current Commander in Chief of the United States?
• What is required for the parachute loft area to adequately support parachute maintenance?
• What characterizes a Class A mishap?
• What is the best condition for storing aviation tires?
• What is the key safety hazard associated with pressure while working on oxygen converter assemblies?
• Which term best describes an object needing a force to change its state of motion?
• What was the significance of the Battle of Midway?
• What is the O-Level program managed by QA?
• How are saltwater stations identified on the flight deck?
• What is one of the main safety concerns while working on the flight deck?
• What is the purpose of the SORM?
• What type of repairs would be handled by the SE STRUCTURAL/HYDRAULIC BRANCH?
• What does AFFF stand for?
• What is defined as the employment of chemical agents intended for military operations?
• What is the secondary duty of firefighters?
• How are 3rd degree burns described?
• What safety concern is associated with Liquid Oxygen systems?
• Which of the following actions can help reduce energy consumption in a workcenter?
• What does ILS stand for in aviation terms?
• What is the primary duty of firefighters?
• What type of materials would a welder not typically work with?
• When performing CPR, how many rescue breaths should be given after a set of compressions?
• How many key elements are there for a fire?
• What is a primary purpose of ailerons in flight?
• What color jersey is worn by aviation fuel crew?
• What is an essential requirement for the parachute loft's location?
• What should you do if you encounter damage to a tire or wheel assembly?
• Which of the following is one of the five classes of LASER?
• What is the purpose of a Huntron?
• What does the 310 format represent in a command's inventory?
• Who wears a yellow jersey among the following?
• What is the primary risk associated with thermal runaway in batteries?
• How often must a GTETS and GTF operator recertify?
• Which of the following is NOT a requirement for PPE on the flight deck?
• In terms of fire safety, what role does oxygen play?
• What is recorded in the support equipment history records using OPNAV 4790/51?
• What does the acronym TD stand for?
• Who is responsible for wearing red jerseys on the flight deck?
• Who is the Secretary of the Navy?
• What is an AUL?
• The 17-foot parachute canopy is known for which of the following features?
• What role does the Command Master Chief (CMC) serve?
• What is a common precaution when handling graphite or carbon/epoxy composite materials?
• What is the acronym for Aircraft Maintenance Material Readiness List?
• What does SE stand for in relation to maintenance branches?
• Which statement best describes the role of a CO?
• What does the transition from higher to lower DEFCON levels represent?
• Which of the following is NOT a factor contributing to aviation mishaps?
• Which capability relates to maintaining a military presence in international waters?
• What is encryption primarily concerned with?
• Which of the following is NOT one of the 5 S's?
• What type of personal protective equipment is commonly required when handling composite materials?
• How many flat plate welding positions are there?
• What is the final order of the five steps in the ORM process?
• What two agents are required to neutralize a battery leakage?
• In addition to turning off computer monitors at night, what is another method to save energy?
• Who serves as the Vice President of the United States?
• Which three statuses does OOMA track?
• What is the purpose of the NOMP?
• Why is proper handling of tire and wheel assemblies critical in aviation?
• What is the primary purpose of the FPCON levels?
• What does the term "Warning" indicate in safety protocols?
• Who among the following would wear a purple jersey on the flight deck?
• What is force?
• What does DEFCON 1 signify in military readiness?
• What is one type of flared tubing joint?
• Which of the following best describes the concept of QA?
• Who is responsible for setting the policies for the NOMP?
• How is corrosion defined?
• What is included in Section Two of the OPNAV 4790/51 record?
• What is one item that Section Six of the OPNAV 4790/51 record may include?
• What does the Oxygen Regulator and Equipment Shop specialize in?
• Which of the following is a measure taken to prevent ESD?
• What does MMP represent in the context of aviation?
• What does MOVEREP stand for?
• What is the primary objective of any paint system?
• What is meant by ASPA in the context of rework maintenance?
• What does SITREP stand for?
• What is a nerve agent?
• Which shop is involved in the repair of microminiature components?
• Which life preserver assembly can be used only in aircraft equipped with ejection seats?
• What does the acronym ECM stand for?
• What is the primary use of the X-Ray NDI method?
• Which of the following is NOT one of the four types of chemical agents?
• What is the purpose of OPTAR?
• Which inspection method is critical for assessing tire integrity without affecting appearance?
• What is the primary purpose of a hangar in aviation?
• Which of the following best describes 'accept no unnecessary risk' within ORM principles?
• What does BMT stand for in process management?
• Which of the following is a safety hazard associated with test cell operations?
• How many chains are required for moderate weather?
• What does "May" imply in a set of instructions?
• Who is the Master Chief Petty Officer of the Navy (MCPON)?
• What does the acronym IFF stand for?
• What types of detection systems can Electronic Counter Measures be used against?
• What is SAPR?
• What is thermal runaway in relation to batteries?
• What does a rejected calibration sticker signify?
• What is drag in the context of aircraft flight?
• Which of the following is NOT one of the three key elements of a fire?
• What type of technical directive is characterized by immediate implementation of changes?
• Which FPCON would you follow in a normal, unthreatened environment?
• What is primarily worked on in the 900 division?
• How does the term "Will" function in operational language?
• How many major sections are typically found in an engine?
• Which of the following strategies can effectively contribute to energy savings in a naval environment?
• Who signed the Navy Energy Vision?
• Which type of helicopter is supported by FRCNW?
• Name one of the HERO Conditions.
• Which of the following is NOT a type of calibration sticker mentioned?
• What does VSA stand for in process improvement?
• What are two components commonly used to protect an electrical circuit?
• What is the designation for the shop identified as 51D?
• Which color sticker indicates that no calibration is required?
• What is a potential safety hazard when working on oxygen converters?
• Who is the Commanding Officer for FRCNW?
• What is the purpose of an overrun area?
• Which of the following is an example of a type of nuclear explosion?
• What does the term '5 S's' refer to in process improvement?
• What does AD stand for in aviation terminology?
• What is the purpose of HT in aviation?
• What should technicians monitor to prevent thermal runaway?
• Which rates are known to work within the 600 Division?
• The Paint Shop is designated by which number?
• How many volts of static electricity can build up in the aircraft windscreen?
• Which shop handles the testing and repair of safety equipment used by aviators?
• What are the five major parts of a standard service parachute?
• What is the full meaning of HAZMAT?
• Which program focuses on the systematic analysis of maintenance practices within aviation?
• Which option reflects a responsibility of fire prevention teams?
• What is the second step in the ORM process?